This oval wooden shell, widely used by Roman cavalry, is covered with leather on both sides. In the center is a black steel projection adorned with golden leather wings and lightning on the curved face and arm straps on the back. Essential to complete your Roman costume!
(editar com o módulo Customer Reassurance)
(editar com o módulo Customer Reassurance)
(editar com o módulo Customer Reassurance)
| Width | 59 cms. |
| Height | 107 cms. |
| Material | Wood and metal |
| Weight | 5.5 Kg |
Gladius Roman dagger decorated with magnificent finishes. stainless steel sheet prints. Pomo and spares also include Roman allegories. 38 cms. Includes leather hem.
Romano Gladiator vest with strips and with self-adjustable triple buckles strap. Made of premium leather. Standard size.
Roman imperial helmet, but with other engravings like the eagle and the golden tones. The Roman Legion was the basic infantry military unit of Ancient Rome. It consisted of a heavy infantry corps of about 5,000 and later 10,000 infanteria soldiers and several hundred knights.
Navy Sword
MANUFACTURED ACCORDING TO THE SPECIFICATIONS OF THE GOVERNMENT OF URUGUAY.
All blades are stainless steel, polished, engraved and finished to government specifications.
Includes hem.
The appearance and cut of this tunic are based on an archaeological find dating back to the 11th century. In 1984, during excavations in Viborg (Denmark), a bundle of fabric glued to canvas was discovered. As it turned out, these were individual fragments that could be put together to form a tunic. Only the back and sleeves have not been preserved in their entirety and leave a bit of room for interpretation.
The tunic has a very elaborate and unique cut for the time. The upper part of the fuselage is worked in two layers at the front and back and has a rectangle from which the seams protrude diagonally. The neckline is equipped with two slits and drawstrings. The arm ball is cut straight and is complemented by a reinforcement in the armpit area. The sleeve is made up of a total of three pieces of pattern and tapers towards the hem. The side seams are slit, with the back reaching a few inches above the front, covering the top of the slit.
Our cotton tunic is a unique reconstruction of the Viborg tunic of the Middle Ages. We place special emphasis on the correct cut of the dividing seams, the finishing in the details and the correct proportions. We have slightly lengthened the total length of the torso and sleeves for aesthetic reasons. Thus, our Viking tunic has long sleeves and the hem ends at the thigh height. The elaborate tunic can be worn as both an upper and lower tunic. The fabric (100% cotton) is medium firm and double-layered in the torso area.
The tunic is the perfect cloak for all Nordics. For an authentic outfit, we recommend pairing it with a belt, calf wraps, and ear pants.
Details:
- Available sizes: S, M, L, XL, XXL
- Color: Wine red (also available: natural, green, dark blue)
- Material: 100% cotton
- Total length in size L: approx. 100 cm (measured in the center of the back)
- Care instructions: Machine wash at 40°C, gentle cycle, not suitable for tumble drying
| Size chart - Men - Tunic | ||||||||||||||
|
How to find the right size:
- To determine your dress size based on your body measurements, measure horizontally at the widest point.
- For tank tops, use your chest circumference as a guide.
- If you are between two sizes, we recommend that you choose the larger size.
- Convenience allowances are included in the cut.
Attention:
Only the tunic will be sold! The other items are available separately in our online store.
Templar decorative dagger alusive to the Priory of Sion with the inscription "I Hoc Sign Vinces", with this sign you will gain on the blade and guard. Gold guard and button with enamelled Templar cross. Includes matching pod
Resin figure of the Knights Templar, measures 8 cms
This medieval cotton belt has a noble edge. The edges are framed with debrum in contrasting colors. The eyelets on the back allow the circumference to be adjusted from 80 to 100 cm.
Soporte wooden display for revolver - pistol. Distance between soportes 150 mm. Base measure 250 x 110 mm
This practical notebook is protected by a gummy leather cover and the removable notebook is ideal for customer orders, addresses, personal notes, etc.
Katana from the Naruto series. Fantastic with stainless steel lamina in black color.
This Viking Age knife features a sharp high-carbon steel blade. The wooden handle ends on both sides with bone and brass rings. It has an oval cross section that ensures a solid grip to the knife. The brass cover is equipped with a convenient drawstring hole (the leather drawstring is included in the delivery).
The beautiful leather hem with brass period accessories is equipped with three brass rings and belt straps for typical Viking-style horizontal transport. The bows are adorned with stylized animal-shaped heads, modeled on finds by Björkö / Birka, Sweden.
Hammer
of War
By the end of the 13th century, the sword ruled supreme as the main weapon of the Knights and Men-at-Arms. However, with the introduction of steel plate armor, the sword's popularity as a battlefield weapon began to wane, as it could not cut or crush steel plates. Enter the War Hammer...
The War Hammer was perhaps the ideal weapon for use against an opponent encased in sheet steel. The heavy hammer head could crush the strongest helmet or plate suit with just a few hits, and the rear spike could rip through this armor like a modern can opener! In battle, the hammer side was usually employed first to knock down and stun an enemy. Once he was on the ground, defenseless, the hammer was reversed and the rear spike was used to punch a hole in the helmet and deliver the coup de grace.
Already proven to be popular with historical European martial artists and reenacters, the modern interpretation of the Cold Steel® War Hammer is highly maneuverable and can be easily wielded with one or both hands. The head is forged from 1055 high-carbon steel and differentially heat-treated: The spike tip and hammer face are fully hardened so that they can pierce and crush tough materials, while the rest of the hammer is forged to be softer to absorb the shock of heavy blows. The handle is 30 in. (approx. 76 cm) straight-grain American walnut topped with a pair of sturdy steel langettes.
Details:
- Hammer/Spike Material: Forged 1055 Carbon Steel
- Handle material: Straight grain walnut with langettes
- Total length: approx. 76.2 cm
- Head width: approx. 18.7 cm
- Hammer face: approx. 3.8 cm x 3.8 cm
-Weight: approx. 1000 g
- Cold Steel® Product Number: 90WHA
Colada del Cid dagger with scabbard, guard and pommel with nickel details. With a total size of 41 cm, steel blade. Maximize your experience with the sword of the legendary Cid Campeador. With its nickel-detailed scabbard, guard, and pommel, this 16-inch steel sword offers the authenticity and power you're looking for in a weapon.
Overall size: 41 cm
Blade size: 24 cm
Blade thickness: 2.4 mm
Weight: 313 gr
Base: varnished samba wood and adhesive felt on the base (to avoid scratches on furniture);
The horse is made of ABS plastic (anti-breakage system);
The figure of the knight is of pieces of tin or zamak;
The spear is a golden brass rod;
The flag is embroidered felt;
Fabrics and piquillos.
These creatures from your enemy's kingdom think twice before making way for yours. For your kingdom is guarded by you; a powerful knight, riding his faithful horse, wearing his ELEGANT KNIGHT GREVAS that protected the guardian in all his missions and highlighted him. So be sure to dress up our MEDIEVAL FANTASY KNIGHT STRIKES as you prepare for your next LARP, cosplay, reenactment or medieval event.
These grevas are hand made of robust 16 gauge soft steel that makes them fully functional and will surely accompany you in almost every event, battle after battle. These are fastened with two sturdy leather straps and steel buckles. Each greva is approximately 35.5 cm (13.9 inches) long, 15 cm (5.9 inches) in the top width, 12 cm (4.7 inches) in the lower width. These graves are available in a size that fits most.
Blade size: 39.7 cm
Total size: 50.7 cm
Includes:
-Sheath
-Soporte
This oval wooden shell, widely used by Roman cavalry, is covered with leather on both sides. In the center is a black steel projection adorned with golden leather wings and lightning on the curved face and arm straps on the back. Essential to complete your Roman costume!
