In this single MASON SWORD, a large part of the symbols of Freemasonry are collected, highlighting the compass and square, the plumb line and the hammer, the book and the eye of God and the five-pointed star linked to the initial "G" of Ótimo (great).
(editar com o módulo Customer Reassurance)
(editar com o módulo Customer Reassurance)
(editar com o módulo Customer Reassurance)
| Long | 116 cms. |
| Manufacturing site | Toledo (Spain) |
| Material | Blade: stainless steel |
Unofficial dagger model Sung Jinwoo replica of Solo Leveling, with a total size of 75 cm, black and red cut bamboo blade and black synthetic leather lined sheath.
Overall size: 75 cm
Blade size: 44 cm
Blade thickness: 7.25 mm
Support: Unsupported
Weight: 240 gr
This medieval overdress has a tight bodice and A-cut skirt. The laces going down to the waist replace the custom dividing seams and allow you to adjust the size for a custom fit - if you remove all the laces, you can break the dress into its individual parts.
Sword of the Scottish Court by Paul Chen
Quick and elegant would better describe the sword of the Scottish court. Replicate an original dating from the 1730s and belonging to a
officer of Prince Charles Edward Stuart's army at Culloden, the finely carved silver-plated cape and three-edged hollow ground
The blade exemplifies the consummate skill of the blacksmiths of the period.
Made with carbon steel blade and brass handle. Includes hem with leather finishes and brass accessories to match the saber.
If you're a true One Piece fan and looking for a Sandai Kitetsu katana to make your cosplay look perfect, this sword is just what you need. With its bamboo wood sheet you can enter any event without any problems as it does not contain metal.
In addition, this katana is fully functional, the same size as the original one used by Zoro in the anime. Its bamboo blade is resistant and its aesthetics are identical to the original, but with the advantage of being lighter.
The bamboo blade of this katana measures an impressive 66 cm in length, while the handle is 31 cm long. The total length of the katana is 103.5 cm. The scabbard that comes with the katana is made of wood, which makes it very sturdy and durable. The handle is coated in Cordura for a more comfortable and secure grip.
If you're a collector of One Piece memorabilia or simply a fan of the world of cosplay, you can't miss the opportunity to own a Sandai Kitetsu katana like this. It is a unique piece, perfect to display in your room or take with you to any cosplay event where you want to stand out.
In addition, it is made by following the webmaster and SEO guidelines set by Google, making your content easily readable and understandable to any audience. Don't miss your chance to get your hands on this authentic One Piece work of art!
Pope Clement III (1187-1191) promoted the Third Crusade with the presence of Kings Frederick I Barbarossa of Germany; According to Philip of France and Richard I Lionheart of England.
Barbarossa was the first to arrive, but failed to finish the conquest because he drowned in the river on June 10, 1190. His allies Richard The Heart of The Lion and Philip second had to return to their respective countries, as the administrations of John Lackland Ricardo and conflicts between England and France apremiaron their returns.
The kettle hat or war hat, a fairly simple helmet in the shape of a brim hat, came into vogue in the 13th century and enjoyed great popularity among foot soldiers, archers, crossbowmen, pikemen, and men-at-arms throughout Europe until the 15th century. It owes its name to its resemblance to a pot (originally called a kettle).
Although kettle hats existed in many variations, they all shared the same main feature: a wide brim that offered protection against downward sword blows and projectiles fired or dropped from above, without impairing the wearer's vision, hearing, or breathing. This design proved useful during sieges and massed infantry battles and contributed primarily to the enduring prevalence of this type of helmet. The so-called sallet developed from the kettle hat in the fifteenth century.
This reconstruction of a late medieval kettle hat is made of 1.6 mm steel (16 gauge). The edge of the flap is wrapped all the way around and four bands or plates (in German called Spangen) are arranged decoratively in the shape of a cross on the helmet bowl. In the overlapping areas, the thickness of the material is more than 5 mm. Dark brown leather straps with aged brass buckle are riveted to the two cheek guards.
The interior is blackened for better corrosion resistance. It is equipped with an adjustable padded lining made of high-quality black fabric and fastened with rivets.
Suitable for light combat staging, LARP, stage or TV/film, this wearable helmet is best suited for late medieval scenarios and ideal for completing the armour of a European warrior. Of course, it will also be a great addition to any helmet collector's treasure chamber.
Shirasaya Decorative 67.5 cm steel blade with satin finish, with sheath and light wood handle, with support.
Overall size: 100 cm
Blade size: 67.5 cm
Blade thickness: 3.8 mm
Cape: Wired
Weight: 800 gr
Support: Supported
Michonne functional katana, unofficial replica of Walking Dead, 1045 aisi carbon steel blade 1045 cm, brown hem with white rope and handle to hang on the back, white coiled handle. Supported.
The appearance and cut of this tunic are based on an archaeological find dating back to the 11th century. In 1984, during excavations in Viborg (Denmark), a bundle of fabric glued to canvas was discovered. As it turned out, these were individual fragments that could be put together to form a tunic. Only the back and sleeves have not been preserved in their entirety and leave a bit of room for interpretation.
The tunic has a very elaborate and unique cut for the time. The upper part of the fuselage is worked in two layers at the front and back and has a rectangle from which the seams protrude diagonally. The neckline is equipped with two slits and drawstrings. The arm ball is cut straight and is complemented by a reinforcement in the armpit area. The sleeve is made up of a total of three pieces of pattern and tapers towards the hem. The side seams are slit, with the back reaching a few inches above the front, covering the top of the slit.
Our cotton tunic is a unique reconstruction of the Viborg tunic of the Middle Ages. We place special emphasis on the correct cut of the dividing seams, the finishing in the details and the correct proportions. We have slightly lengthened the total length of the torso and sleeves for aesthetic reasons. Thus, our Viking tunic has long sleeves and the hem ends at the thigh height. The elaborate tunic can be worn as both an upper and lower tunic. The fabric (100% cotton) is medium firm and double-layered in the torso area.
The tunic is the perfect cloak for all Nordics. For an authentic outfit, we recommend pairing it with a belt, calf wraps, and ear pants.
Details:
- Available sizes: S, M, L, XL, XXL
- Color: Wine red (also available: natural, green, dark blue)
- Material: 100% cotton
- Total length in size L: approx. 100 cm (measured in the center of the back)
- Care instructions: Machine wash at 40°C, gentle cycle, not suitable for tumble drying
| Size chart - Men - Tunic | ||||||||||||||
|
How to find the right size:
- To determine your dress size based on your body measurements, measure horizontally at the widest point.
- For tank tops, use your chest circumference as a guide.
- If you are between two sizes, we recommend that you choose the larger size.
- Convenience allowances are included in the cut.
Attention:
Only the tunic will be sold! The other items are available separately in our online store.
The Lord of the Rings Guthwine The Sword of Éomer
Replica of the officially licensed film of The Lord of the Rings, from Cutlery United
This pair of arm protectors is made of thick, tanned buffalo leather with vegetables (granules) and soft suede. The two layers of leather are connected by rustic-style rivets. The surface and edges of the thick granulated leather were polished and received a light-colored finish, giving the leather a distinct used appearance.
This is the decorative version of the "Rebellion" sword owned by Dante from the "Devil May Cry Compilation".
The story of Devil May Cry begins with Mundus and Sparda, two equally evil demons. 2,000 years ago, the demon king Mundus wanted to conquer the world of humans. But Sparda, one of his officers, felt sorry for humans. He formed an army of demons to fight his king and stop the advance of demons into the world of humans. During the fight between the two armies, Sparda attacked his king, won, and threw him back into the demon world. He sealed the gate to the demonic world. Later, Sparda gave all her power to her two sons, Dante and Vergil. Dante was a rebel with a quick temper who didn't care about anyone's opinion, but saved humans from any demonic attack. He received the mighty sword Rebellion. He owns the demon-hunting business "Devil May Cry". The true power of the Rebellion can only be awakened by the blood of Dante. For a short time, he will change from his human form to his demonic form, which will increase his physical and magical abilities.
Rebellion is a huge broadsword with a heavy, double-edged blade, carved on both sides near the tip. The pommel is divided into several ends. The grip is simple, but the protection is skeletal, with a skull face on each side leading to the ribcage from which the blade emerges.
This is an excellent gift for any DMC fan!
Details:
Total length: approx. 136.5 cm
Blade length: approx. 93 cm
Strap length: approx. 30.5 cm
Material:
Steel Weight: approx. 3120g
In this single MASON SWORD, a large part of the symbols of Freemasonry are collected, highlighting the compass and square, the plumb line and the hammer, the book and the eye of God and the five-pointed star linked to the initial "G" of Ótimo (great).
