Eager to portray a Norman knight fighting for none other than the ferocious William 'the conqueror'? Then you will surely need to stay protected while attacking Harold's Saxons! This sturdy Nasal helmet will make it effortless for you!
For centuries, the nasal helmet has been the most popular helmet in most of Europe due to its versatility and good balance between protection and mobility. For example, it proved to be ubiquitous in the Bayeux tapestry, representing the invasion of Saxon England by the Norman knights and minions of William the Conqueror. Speaking of whom, a specific incident at the Battle of Hastings, illustrated in the Bayeux tapestry, reveals how William the Conqueror had to lift his nasal helmet to show his troops that he was still alive after the rumor of his death spread in his army.
This gorgeous nasal helmet is handmade in soft steel of 16 caliber, lined with a comfortable and secure leather lining. A circumference of approximately 68 cm makes it fit into almost all head sizes. And a sturdy closed chin strap with a beautiful buckle will help keep your helmet in place during all your battles.
(editar com o módulo Customer Reassurance)
(editar com o módulo Customer Reassurance)
(editar com o módulo Customer Reassurance)
Solid wood display case for sword or sabre with scabbard
Suitable for all types of swords.
Made of fine suede leather.
With strap and buckle.
Color: black
Now you can practice with some of Cold Steel's most popular knife designs, relatively safely, with their rubber training knives. drills, disarming drills and demonstrations and any other activity where you want a reasonably close approximation to realism but not the extreme danger and risk associated with a real knife.
Santoprene rubber blades are soft enough to prevent the likelihood of bodily injury. However, they have a level of firmness that can cause injury to the face or eyes, so it is recommended that proper eye protection or a fencing mask is always utilized when using a Cold Steel rubber training knife.
Cold Steel's medieval training dagger is affordable, functional, and very durable. Add one to your training gear today!
Details:
- Material: Santropene Rubber
- Total length: approx. 41.6 cm
- Blade length: approx. 25.4 cm
- Blade thickness: approx. 19 mm
- Cable length: approx. 16.2 cm
- Weight: approx. 201 g
- Cold Steel Product No.: 92RDAGZ
Medieval leather purse, large, black
These leather bags are sewn in cylindrical shape. Simple, nice and useful.
Details
- Material: suede leather
- Diameter: approx. 8.5 cm
- Height: approx. 12 cm
- Color: black
Now, here's something a little special: With a good range of hunting knives and fast, nimble combat blades already in production, Down Under Knives set out to prove that size and subtlety aren't mutually exclusive. For them, nothing says it better than James Black's timeless Arkansas toothpick designs—dedicated combat knives with unmatched range and destructive potential, without sacrificing anything in speed, utility, or accuracy.
Down Under Knives has taken the basic concept and given it the signature touch of classic styling and modern durability, with rust-resistant materials and tough leather that's as good as it looks. Down Under Knives didn't want to go overboard with sharp edges two inches from the centerline and sharp corners everywhere, opting instead for a classic style that feels like it's been shaped by your hand and gives no surprises when you connect with something. For a finishing touch, they've given it an extra-large, distinctive-styled handguard and ricasso that offer real options between extreme reach and maximum agility. And they say extreme, they kind of mean it. With a total length of ca. 42 cm, the next step would be a short sword.
Delivered with an antique-looking brown-black sheath with a classic wild west floral pattern, this knife proudly showcases your heritage and won't look out of place on any old west aficionado's belt or as part of a modern hunter's toolkit.
Details:
- Blade material: 440C heat-treated stainless steel
- Handle material: leather
- Total length: approx. 42 cm
- Blade length: approx. 30 cm
- Blade thickness: approx. 6 mm
- Weight: approx. 590 g
- Sheathed weight: approx. 720g
-Incl. Leather sheath
Red Dragon Fencing Mask, 350N
The Red Dragon Fencing Mask is one of the most popular masks on the HEMA market and represents an excellent value for beginners. This durable mask is suitable for long-sword sparring and most other HEMA activities. It comes in "HEMA black" and has a removable red lining (hand wash only). The bib is rated at 350N.
The sizing of fencing masks is based on the vertical circumference of the head.
Measure your face by taking a tape measure, holding it under your chin with your mouth slightly open, under your jaw, through your ear, down the top of your head, past your other ear, and down to the bottom of your chin (where you started from).
Measurement around the face
- S: 56-59cm
- M: 61-64cm
- L:66-69cm
- XL: 73-76cm
Decorative Katana Enma de Zoro from One Piece. It comes to una replica na oficial con hoja en acero acabado en negro con detalles en rojo y el corte en satinado, mango blanco con detalles en dorado..
This medieval floor-length dress is simple and yet has something very special. A generous hood and flared trumpet wide sleeves create a mystical look.
The sleeves are tied, which allows the sleeve length to be adjusted individually. The black cotton dress can be worn as a bottom dress or an outer dress.
If the dress is paired with a bodice, for example, the result is a wonderfully spooky Halloween costume or in combination with a red surcot, the dress looks equally courteous.
Details:
- Available sizes: S, M, L, XL, XXL
- Color: Black (also available: Wine red)
- Material: 100% cotton
- Total length in size M: approx. 150 cm (measured from the highest point of the shoulder)
- Care instructions: Machine wash at 40°C, gentle cycle, not suitable for tumble drying
| Size chart - Women - Dresses | ||||||||||||
|
How to find the right size:
To determine your dress size based on your body measurements, measure horizontally at the widest point. For dresses, use the circumference of the chest as a guide.
If you are between two sizes, we recommend that you choose the larger size.
Convenience allowances are included in the cut.
Handle: CNC Resistance
Blade size: 24.5 cm
Total size: 36 cm
Leather case
Cuchillo con el escudo de los templarios. La cuchilla es de acero inoxidable.
Viene con un estuche.
Exclusive high-quality special sheath for the Excalibur Sword manufactured by MARTO
Made of wood and lined with leather.
It is adorned at the top and bottom with metallic finites in nickel finish.
Incorporates a double leather belt to be worn at the waist.
Beautiful cotton dress with slightly conical sleeves. It's tied to the sides and back.
Only the dress is included in the delivery, not the accessories that can be shown.
We recommend cold washing or dry cleaning.
Details:
- Material: 100% cotton
- Color: red
- sizes: S, M, L, XL, XXL
Short jellyfish jellyfish with scale handle, finished in aged silver and stainless steel blade, temperate and satin with wide and empty edges. Length 29 cms and weight 850 grams
Confederate Revolver, disenado by Griswold & Gunnison, USA 1860.
Measures: 35 cm
Weight: 1,022 g
Season: Western and American Civil War 1861-1899
The Silver Sword in Silver was used to cross the mail. Alfanje is a Castilian term that comes from the Hispanic Arabic al-janyar, which means the dagger, and designates a broad and curved blade sword, with a single-sided border (or counterphilic in its last third) that during the Middle Ages and even the Renaissance was used in the Iberian Peninsula, much of the Mediterranean and especially in Italy. In the old Spanish vulgar it was also known as terciado .
medieval sword also called bastard, 14th century, for training with blunt tip and blade (rounded). With hand forged carbon steel blade, curved guard with ring, carved wooden handle and spiral steel button.
Eager to portray a Norman knight fighting for none other than the ferocious William 'the conqueror'? Then you will surely need to stay protected while attacking Harold's Saxons! This sturdy Nasal helmet will make it effortless for you!
For centuries, the nasal helmet has been the most popular helmet in most of Europe due to its versatility and good balance between protection and mobility. For example, it proved to be ubiquitous in the Bayeux tapestry, representing the invasion of Saxon England by the Norman knights and minions of William the Conqueror. Speaking of whom, a specific incident at the Battle of Hastings, illustrated in the Bayeux tapestry, reveals how William the Conqueror had to lift his nasal helmet to show his troops that he was still alive after the rumor of his death spread in his army.
This gorgeous nasal helmet is handmade in soft steel of 16 caliber, lined with a comfortable and secure leather lining. A circumference of approximately 68 cm makes it fit into almost all head sizes. And a sturdy closed chin strap with a beautiful buckle will help keep your helmet in place during all your battles.
