This robust and lightweight torso armor is made of high quality leather tanned with vegetables. Sturdy stitching ensures long-lasting durability.
(editar com o módulo Customer Reassurance)
(editar com o módulo Customer Reassurance)
(editar com o módulo Customer Reassurance)
The chest and back are bordered with old-fashioned brass eyelets on the sides and shoulders and tied with round leather laces. The front consists of two panels and also features a loop to the center. The combination of the ties on the shoulders, front and sides makes this thin leather battleship adjustable to a wide variety of sizes. Left open, resembles a thick leather vest or vest.
Due to its simple (yet elegant) design, this leather armor lends itself very well as a basis for representing a wide range of historical characters and fiction/fantasy and is suitable for many periods of time. An ideal accessory for medieval stagings, LARP, stage or costumes, it will make your transformation into a proud warrior perfect.
Features:
- Material: vegetable tanned leather, aged brass eyelets
- Color: brown
- Thickness: approx. 2 mm
- Weight: approx. 1.1 kg
- Total length: approx. 63 cm
(measured from the tip of the highest shoulder to the lower hem)
- Width in the chest (when placed horizontally): approx. 53 cm
- min. chest circumference (for tight adjustment): approx. 108 cm
The armor can be widely sized by loosening the loop, therefore adjustable to almost any size.
Specifications may vary slightly from part to part.
19th century Kentucky pistol short American barrel. Made of wood and Zamak. The firing mechanism works. It's a decorative piece.
RRZ9 Knitted quota shirt, Haubergeon, riveted, zincada
Battle-ready
The haubergeon (= small Hauberk) is a mid-sleeved knitted shirt that reaches up to the thighs.
The RRZ mesh quota
it is manufactured with round rings of galvanized steel. Each ring was riveted by hands with round rivets. It is woven in pattern 4 in 1.
Galvanization offers - in contrast to the natural and smooth mesh finish - a fairly good protection against corrosion.
Wooden katana ideal for martial arts practices.
Viking Sword Godofada
Named for the dandy 8th-century Viking Godfred Haraldsson, this sword is built around a beautifully patterned folded steel blade to replicate the originals of the 9th century. The interlaced leather handle, complemented by an Apricot guard and pommel, is accompanied by a leather-covered wooden hem with brass detailing and full belt hooks.
Sword sized with leather coated hem including metallic coatings. stainless steel sheet and rubber cable slip. Includes hem and support.
Used as a weapon and as a ceremonial object, the tomahawk was made in very different ways. This tomahawk collector has a large sheet, made of high carbon steel and forged by hand. This model has on the sheet a drawing of points that interact with perforated ornaments.
The Katana Shinogi-Zukuri Raptor blade, which has developed as the most common Japanese katana blade design, offers speed and
cutting power. Featuring a distinct Yokote, such blades were originally produced at the end of the Heian period, around 987 AD
Elden Ring sword straight sworn sword, unofficial replica, with a total size of 96.5 cm with black steel blade, burgundy synthetic leather cord handle, handle and cross with gold finish, with brown synthetic leather scabbard.
Overall size: 96.5 cm
Blade size: 72 cm
Blade thickness: 3.7 mm
Cape: Wired
Support: No
Weight: 1216 gr
Katana de Demon Slayer wielded by Agatsuma Zenitsu unofficial replica of 101 cm steel blade, cord with white cord and imitation ray skin in orange
This late medieval boot made of beautiful suede is closed at the front and fastened to the shaft with five brass buckles. For the sole, we opted for a secure and durable base and therefore chose a rubber sole. Rubber soles are the best choice if you are riding on asphalt, concrete or gravel.
Details:
- Material: Cowhide approx. 2 mm
- Rubber sole: approx. 7 millimeters
- Size: Black
- Available in sizes: 39 to 45
Throwing Hawks, 3-pack with nylon sheath, SOG
The Throwing Hawk set includes three one-piece steel hawks that are specifically designed for target throwing.
Protected by SOG's hard black coating, they are extremely scratch-resistant. Their balance, aerodynamics, and proportions make them great pitching hawks. For the same reasons, they are also great tools.
The handles are wrapped with paracord or you use it without it and have three tomahawks for the price of one!
It includes a nylon sheath that safely carries all three axes .
Details:
- Blade Material: 3Cr13MoV
- Total length: approx. 27.3 cm
- Blade length: approx. 4.5 cm
- Cable Material: GRN
- Weight: 720.1 g
Sword of the Viking King, Windlass
The Vikings emerged from the north to invade and colonize almost the entire known world. They also waged war with each other, and it was not uncommon for kings themselves to lead their troops into battle.
The blade of this Viking sword is made of tempered 1095 carbon steel. The hem is covered with leather and imitation reindeer fur and features some elaborate reliefs. Its metallic decorative elements are handmade and very detailed, in addition it has a sword belt. This sword and its complex scabbard would be worthy of one of those brave Norse kings.
Manufactured by Windlass Steelcrafts.
Note that this sword is not a battle-ready weapon. It is designed as a collector's piece or decoration/display and is not suitable for combat reenactment. In addition to collector's quality, it is also perfectly suited as an accessory, for example to complete your costume.
Eager to portray a Norman knight fighting for none other than the fierce William 'the Conqueror'? Then you'll certainly need to stay protected while attacking Harold's Saxons! This sturdy Nasal helmet will do it effortlessly for you!
For centuries, the nasal helmet was the most popular helmet in most of Europe due to its versatility and good balance between protection and mobility. For example, it proved ubiquitous in the Bayeux Tapestry, depicting the invasion of Saxon England by the Norman knights and footmen of William the Conqueror. Speaking of who, a specific incident at the Battle of Hastings, illustrated in the Bayeux Tapestry, reveals how William the Conqueror had to lift his nasal helmet to show his troops that he was still alive after the rumor of his death spread in his army.
This beautiful nasal helmet is handmade from 16-gauge mild steel, lined with a comfortable and secure leather lining. A circumference of approximately 68 cm makes it fit almost all head sizes. And a sturdy chin strap closed with a beautiful buckle will help keep your helmet in place during all your battles.
Game Of Thrones - Sheath for Oathkeeper's Sword Replica
officially authorized from the hit HBO TV series Game of Thrones ®
MG 34 machine gun, Germany 1934 (WW2)
Measurements: 122 cm
Weight: 7.277 g
Country of manufacture: Germany
Era: World Wars 1914-1945
This robust and lightweight torso armor is made of high quality leather tanned with vegetables. Sturdy stitching ensures long-lasting durability.
