Gladiator Steel Neck Protector
Gladiator neck protector, Steel
Two-piece neck guard made of 1.2 mm steel. Both parts are connected with wire pins.
Details:
- Material: approx. 1.2 mm steel
- Finish: Polished (Lightly Oiled)
- Weight: approx. 1.1 kg
(editar com o módulo Customer Reassurance)
(editar com o módulo Customer Reassurance)
(editar com o módulo Customer Reassurance)
Total length: about 55.5 cm
Sheet length: 40.0 cm
max. Blade width: 3.8 cm
Belt width: about 7.5 cm
Gladiator neck protector, Steel
Two-piece neck guard made of 1.2 mm steel. Both parts are connected with wire pins.
Details:
- Material: approx. 1.2 mm steel
- Finish: Polished (Lightly Oiled)
- Weight: approx. 1.1 kg
The Helmet is a piece of armor that covered and defended the head.
Thedaga with carbon steel blade. Fist and guard in brass.
Includes leather hem.
Details:
- Total length: approx. 34.5 cm
- Blade length: approx. 19.5 cm
Long gambeson with removable sleeves
Long and comfortable gambeson with thick padding. This version is slightly wider than similar models, extends slightly above the knees and is tied around the neck. The sleeves are also fastened by ties and can be easily removed.
The Gambeson was a padded and full garment that was worn under the armor of plates or mesh dimension.
Details:
- External material: 100% cotton
- Inner lining: 100% cotton
- Padding: 100% polyester
Templar sword, with carbon steel blade. A high quality sword.
The Order of the Poor Knights of Christ and the Temple of Solomon, also called the Order of the Temple and whose members are known as Knights Templar, was one of the most powerful Christian Military Orders of the Middle Ages.
Medieval leather purse, large, black
These leather bags are sewn in cylindrical shape. Simple, nice and useful.
Details
- Material: suede leather
- Diameter: approx. 8.5 cm
- Height: approx. 12 cm
- Color: black
Bleach Kuchiki Byakuya katana unofficial replica of 104 cm steel blade, white sheath with purple mooring, cape with purple mooring.
Total size: 104 cm
Blade size: 68 cm
Blade thickness: 3.9 mm
Handle: Tied
Weight: 932 gr
Support: Supported
Phyton 0.357 caliber revolver, USA, 1955 8 inches
Resin figure of the Knights Templar, measures 12cms
This battle-ready Viking sword was developed in close cooperation with fencing and martial arts instructor Volker Kunkel and his West-Coast-Institute. Unfortunately, Volker did not live to see the launch of this small series on the market. He passed away very early, in April 2021.
The goal was to offer a sturdy, yet light and well-balanced sword, ready for battle, with a smaller budget. Here, Volker contributed his many years of experience as a fencing teacher, trainer, and traveling merchant in medieval markets. The Ulfberth® team and their blacksmiths have implemented these specifications and the result is a battle-ready Viking sword with a great value for money.
Based on the original from 9 to 10 c. examples found in Britain and classified as Type L according to Petersen's Viking sword typology, features a blade forged in spring steel, which has been hardened in oil and tempered to a Rockwell hardness of approx. 48-52 HRC. The very wide fuller makes it flexible and lightweight. The sword comes with approx. 2 - Edges 2.5 mm thick and tip rounded and relatively wide, which makes it eligible for combat on stage.
Like many surviving historical examples of the time, the pommel is a two-part construction: the trilobed upper section is fixed to the curved base by means of two rivets, and the complete spike of the blade is solidly hammered into the lid of the pommel.
This sword is available with two different blade lengths (select the model you need from the drop-down menu: short = 64 cm / long = 74 cm). The short version is particularly ideal as a beginner's sword for fencers who are not yet very strong.
Matching leather sheaths with sword belt (product no. ULF-SW-11SA or ULF-SW-11SB ) are available separately.
Details:
- Battle-ready sword category: SK-B
Learn more about our classification for practical swords without cutting
- Blade material: spring steel (high carbon steel, non-stainless), hardened and tempered
- Rockwell Hardness: approx. 48-52 HRC
- Cable material: leather-clad wood, handle and protection in cast steel
Dimensions Sword ULF-SW-12 A (short version)
- Total length: approx. 80.5 cm
- Blade length: approx. 64 /64.5 cm
- Handle length: approx. 16 cm (handle approx. 10.5 cm)
- Blade width in protection: approx. 4.6 cm
- Blade thickness: approx. 4 mm (cutting edges approx. 2 mm)
- Break-even point: approx. 10 cm from guard
- Guard: approx. 12.5 cm long, 2 cm wide, 1 cm thick (center) / 2.5 cm thick (ends)
- Weight: approx. 1140 g
In addition to his battle axe, the walking axe is Gimbli's second axe, which he uses, for example, against the Warg Knights who are attacking the Rohirrim villagers. The axe has a long handle with a single blade at the end. This axe was also carried by Gimli's father, Glóin, during the Lonely Mountain quest.
Helena Medieval Blouse for Children, in color
natural
This versatile blouse has a Carmen neckline with small ruffles and elastic cuffs. Small slits at the side seams allow for better freedom of movement.
The blouse is made of light cotton fabric and is very comfortable in fit.
Attention: Delivery includes only the blouse! The skirt and accessories pictured above are available separately in our online store.
Details:
- Available sizes: 110, 128, 146
- Color: Natural color (also available: red)
- Material: 100% cotton
- Length overall size 128: approx. 51.5 cm (measured from center back neck to bottom hem)
- Care instructions: Machine wash at 40°C, gentle cycle, do not tumble dry
In drumTo determine the size you need, please refer to your child's body height (for a child 128 cm tall, size 128 must be ordered).
This loose-cut medieval dress is a floor-length dress with so-called gooes on the sides. Gores, wedge-shaped/triangular fabric pieces added to expand the shape of a garment, gave medieval clothes a generous glow.
This elegant wedding dress consists of two separate pieces: a loose dress with side laces and a bodice included in the birth. Can be worn with or without corset. The laces ensure a great fit and the slit sleeves are incredibly practical when eating.
The dress is predominantly white and has a cream tone on the neckline, sleeves and laces. The corset is also cream. The dress is made with three different cotton fabrics: flowing chambray for the sleeves, white twill for the dress and printed apricot for the details and bodice. In addition, the edges are finished with a satin piping.
The dress is cut extra long, with a total length of 155 cm, as is common in wedding dresses. Depending on your footwear and your body size, we recommend that the length be adjusted individually. We also recommend wearing skin-colored underwear.
Details:
- Available sizes: S, M, L, XL, XXL
- Size: white/natural
- Material: 100% cotton
- Total length for all sizes: approx. 155 cm (measured from the highest point of the shoulder)
- Care instructions: Hand wash
Zoro is a skilled swordsman and is able to use one, two, and three swords in different attack styles, although he is more familiar with the Santoryu fictional sword technique (literally: three-sword style) using his third sword stuck in his mouth. Zoro somehow manages to talk with the sword in his mouth. Eiichiro Oda justifies it by saying that it is his heart that allows him to fight and speak like this. Although he is not a samurai, he has his own code of honor. Your goal is to become the greatest swordsman in the world by defeating the current greatest swordsman, Hawkeye Mihawk.
Throughout history, Zoro has used many different swords. His other notable swords are Sandai Kitetsu, Yubashiri (Yu-Bashiri in Viz translation), and the recently obtained Shuusui, which replaces the broken Yubashiri
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
check_circle
check_circle