Spanish sabre of the general of the Spanish army. With polished stainless steel ear, engraved and finished according to the specifications of the Spanish Government.
(editar com o módulo Customer Reassurance)
(editar com o módulo Customer Reassurance)
(editar com o módulo Customer Reassurance)
MANUFACTURED to SPANISH GOVERNMENT SPECIFICATIONS
| Long | Nine inches. |
| Manufacturing site | Toledo (Spain) |
| Material | Blade: stainless steel |
| Long leaf | 75 cms. |
Cold Steel®'s War Hawk® combines the tactical style and material used in the famous Trench Hawk® with design elements historically inspired by the classic combat hand axes of antiquity.
Adjustable wall support for sword, steel
This simple sword bearer with scissors-like mechanism is made of steel and can be attached to a wall, panel or wooden pole with a single screw. This device offers a perfect solution for vertical display/swords storage with a straight cross protection.
Tabards were used by many knights to identify themselves as crusaders. The coat of arms on them (also called Surcoat or Surcot) appeared in the 12th century and was worn by the knights over their armor or mesh dimension on the battlefield. With the colors and the cross made it clear in the battle fight who was a friend and who was the enemy.
This calf-length tabarde for children is made entirely of strong cotton. It is cut straight and with lateral slit up to the waist. The front and back are also provided with a slightly shorter slit in the middle. The classic Johanniter cross is stamped on the chest.
Looking forward to a perfect knight's gorjal? You can't miss this one!
Expertly HANDMADE sturdy soft steel of 16 caliber, it is an excellent companion for your LARP and reconstitution events, ensuring you stand out with your armor!
Just rotate the two parts in the direction of each other and trap them to close it properly and you'll be ready to defeat your enemies!
A set of ROBUST GENUINE LEATHER BELTS helps to conveniently hold your shoulder pads in place if you wish.
Note: This gorget is small in size and is best suited for fighters who DO NOT use any kind of thick gambeson.
Wooden Norman shield, blank for self-painting
This shield is made of plywood. It is covered by a layer of canvas glued to the wood and pre-painted white. Ideal for personalizing with your own coat of arms.
The back is equipped with a carry handle, arm strap and upholstery, all in leather.
Details:
- Height: approx. 131 cm
- Width: approx. 56 cm
- Weight: approx. 2.9 kg
- Material thickness: approx. 10mm
Keychain of the Templar sword enamelled in red. Made in Zamak.
Around 1030, the Normans directed their attention even to the Mediterranean regions. As a product of decades and many battles, they conquered parts of southern Europe and settled especially in southern Italy and Sicily.
Medieval Colin Shirt for Child, natural color
The right-cut shirt, a true classic of medieval dress, is very versatile - equally suitable for portraying pirates, squires or knights.
This shirt made of fine cotton fabric has a comfortable trim and has a turtleneck with lace on the neckline.
The Philippine islands are widely known for their wide variety of edged weapons. There is a wide variety of Kris sword styles to choose from, as each island, region, or clan has its favorite, with some placing more emphasis on cutting, while others prefer styles that are more conducive to thrusting.
Cold Steels Kris' blades are made of 1055 carbon steel with hard spring quenching. They are satin polished and fully honed. In profile, Kris blades feature a moderately wavy blade shape with three concave curves and a long, descending spearhead found on almost all Kris swords. This blade shape strikes a good balance between cutting power and thrust capacity. The base of the blades ends in traditional flanges decorated with "file cut", with the shorter one protecting the finger and the longer one protecting the thumb, wrist and lower forearm.
Classic straps emphasize strength and durability over fashion. Hand-carved from exotic Sal wood, they are wrapped with wire and embellished with a brass cushion. Each Kris comes with an equally sturdy and practical sheath.
Details:
- Kris Sword
- Blade material: High carbon steel
- Total length: approx. 66 cm
- Blade length: approx. 52.4 cm
- Blade thickness: approx. 5 mm
- Cable length: approx. 13.7 cm
- Weight: approx. 700 g
- Cold Steel® Product No.: CS-SW-KRISSW
Medieval skirt, flare, brown
clear
This beautiful medieval skirt made of 100% cotton has a waistband with a covered drawstring. Both cord endings are adorned with decorative wooden beads. The waistband fits comfortably over the hip.
The wide tailoring and generous length of the skirt make it fall very elegantly. The two built-in pockets are not only convenient, but also underline the good adjustment of the floor length.
The skirt is available in the following colors:
- light brown
- Red (Product No. 1216303080)
- Green (Product No. 1216303070)
- Natural color (product no. 1216303010)
- dark brown (product no. 1216303090)
- Black (Product No. 1216303040)
- Black/Natural (Product No. 1216303530)
- Black/Blue (Product No. 121603540)
- Black/Red (Product No. 1216303510)
Attention:
Delivery includes only the skirt! The other items pictured above are available separately in our online store.
Details:
- Color: Light brown
- Available sizes: S, M, L, XL, XXL
- Material: 100% cotton (100% Baumwolle)
- Overall size length L/XL: approx. 98cm
| Size Chart - Female - Skirt | ||||||||||||
|
How to find the right size:
To take your body measurements correctly, in order to determine the size of your clothing, please always wrap the tape measure horizontally around your body at the fullest part. For skirts, sizes are based on hip circumference. If you happen to fall between two sizes, we recommend that you go up one size. The facility is included in the standard and reflected in the finished measurements.
This long dress has loose cut and is individually adjusted to the body by means of lashing at the waist and back. The bottom of the sleeves also has lashing and can be adjusted.
The details adorned with cotton velvet, such as the hem, the flap and the high collar, give the dress an imposing character. The skirt part is wide and swings beautifully due to the wide velvet hem.
Wood shield decorated and embroidered Edward leather from Woodstock, better known as the Black Prince..
Jian, Damascus Steel
Created by Hanwei to a completely different quality standard than most parts available,
our Taiji Damascus sword is built around a hand forged Damascus steel blade, profiled to produce
a quick and well balanced sword for the martial artist and an authentic piece for the oriental weapons collector.
Ivanhoe medieval sword with enamelled finishes of gold, blue and red "deluxe", handle in Zamak covered in leather and handle on Zamak decorated. Stainless steel blade also decorated. Sheath included.
A practical shoulder armor that comes complete with a chest harness for a stable and comfortable fit. The very neutral design makes this armor suitable for any LARP character. Can be used both left and right sides ... or, of course, as a set on both sides.
Details:
- Material: tanned vegetable leather
- Color: brown
Spanish sabre of the general of the Spanish army. With polished stainless steel ear, engraved and finished according to the specifications of the Spanish Government.
